Features
The machine is suitable for users who often change the site or flow site, which can be flexible and suitable for construction, and is used by customers when carrying out concrete mixing stations on site.
First, the composition of mobile concrete mixing station:
1. Main engine chassis: a cantilever type stirring main engine chassis, the chassis contains a tow truck traction pin, parking legs; Measuring scales for mixers, cement and water admixtures placed on the chassis; Inspection walkway, railings and so on are attached around.
2. Control room: The control room is at the bottom of the chassis of the main engine, equipped with the automatic control system of the mixing station, the control system is the same as that of the fixed mixing station, the control room is used as the front support point of the whole station when working, and the control room is collected in the bracket when transferring; All its control lines do not need to be disassembled.
3. The storage hopper is equipped with a raised plate to increase the storage capacity, and the pneumatic door is opened in turn. Aggregate metering is a variety of accumulated metering methods. The bottom is equipped with a walking rear axle and frame legs for work. Aggregate batching: This system is located at the back end of the whole station, the upper part of the aggregate (sand, stone) storage hopper, storage hopper can be divided into 2, 3 or 4.
4. Belt conveyor frame: the frame is a truss structural part connected to the main engine chassis and the aggregate batching frame, and the belt frame is installed inside; The main frame, belt frame and batching frame are integrated to form the main structure of the whole mobile mixing plant.
5. Screw conveyor peripheral parts: peripheral parts are integral parts when working or transporting, so they can be transported and disassembled as a whole without disassembly.
Two, the advantages of mobile concrete mixing station:
1, the main machine adopts the forced double horizontal shaft mixer, with short mixing time, fast discharge, uniform mixing, high productivity characteristics, can produce plastic, dry hard and other concrete, reliable quality.
2. Measuring cement, water, additives are all using weighing buckets, accurate measurement, microcomputer centralized control, simple operation, easy to adjust, reliable. The aggregate is fed by bucket lifting or belt conveying. Aggregate is measured by electronic balance or separately.
3. Greatly improve the service life of the host. Unique shaft end support and seal type. The electrical components are made of Siemens, which has reliable performance and high production power, and is suitable for mass concrete production on site. The wear-resistant material for the lining plate and mixing blade of the mixer is specially treated.
4, the station is fully functional, has a complete batching, mixing, metering, control system, covers a small area, cost-effective, suitable for small and medium-sized hydropower, roads, ports, airports, Bridges and other mobility project construction.
