Features
The operator of the grinding machine in the concrete mixing station should carefully and seriously deal with the safety issues in production. What details should be paid attention to when using concrete mixing station?
1, when grinding the parts of the concrete mixing station, the knife must be taken after the grinding wheel and the workpiece start, and the grinding wheel stops after the knife is collected. Otherwise, it is easy to crush the grinding wheel, damage the machine tool, and cause serious accidents. In the grinding concrete mixing station, the workpiece can not be cut too fast to avoid burning and grinding wheel rupture, resulting in serious accidents.
2, when the work of the concrete mixing station is completed, the grinding wheel must be pulled out from the handwheel, so as not to load the next workpiece again. When the wheel collision ends or completes a section, the control handle of the dense bed should be in the "empty" position to avoid accidents when the parts move suddenly.
3. When replacing the grinding wheel, the grinding wheel must be carefully checked. When using magnetic chuck, carefully check whether the magnetic chuck is reliable, do not drive the workpiece when it is not sucked in, to prevent damage to the workpiece or damage to the machine.
The commutator block must be carefully adjusted and secured before tightening. In order to prevent the wooden block from moving, so that the table moves above the head, the grinding wheel contacts various parts of the concrete mixing device, causing an accident. When diamond grinding wheels are used for grinding wheels, the feed speed must be stable. People should not operate in front to avoid confusion.
